Plura MTD-ID, Руководство по эксплуатации

Страница: 13 / 18

Operating Manual MTD-ID
Page 13
Firmware Update
Firmware update of MTD- ID is done by updating the base unit. You’ll need an “ xxx + MTD-
ID” firmware file (xxx = name of the base unit ) . Please refer to chapter “ Firmware Update ” of
the base unit’s manual for det ails.
After the firmware update is finished please check power-up messages of both MTD-ID and its
base unit. Both firmware num bers have to be the same, e.g. “ 7.17 ”. If they’re different please
repeat the firmware update process, preferable over Ethernet.
Technical Data
Specifications
Operating voltage 5 V DC, ± 5 % provided by base unit
Power consumption 1.0 W typical
Environmental character-
istics, operating
Temperature: +5 °C to +40 °C
Relative humidity: 30 % to 85 %, non-condensing
Environmental character-
istics, non-operating
Temperature: -10 °C to +60 °C
Relative humidity: 5 % to 95 %, non-condensing
Mechanical
Material Aluminium, rear plate made of steel
Dimensions 87 (W) x 49 (H) x 161 (D) mm; 3.43 (W) x 1.93 (H) x 6.34 (D) inches
Weight ≈ 0.4 kg