Plura MTD-ID, Руководство по эксплуатации

Страница: 12 / 18

Operating Manual MTD-ID
Page 12
Configuration
MTD-ID is configured by its base unit (SPT, TCU or TCUE resp.). Please refer to chapter
“Configuration” of the base unit’ s manual for details. Y ou’ll need the UD SC Config.exe tool;
alternative you can use the web interface.
MTD-
ID is configured on the “MTD - ID” page:
Brightness
Backlight Brightness of the display: 7 steps, 7 = maximum brightness.
Format
Mode Operating modes of the display – dependent on “Source” selectio n. Please
refer to chapter “ Display ” of the base unit’s manual for details .
Color Display color:
Auto If “Source” = “SPT”, “LTC(MTD)” or “MTD”:
The display decodes the color out of the MTD data.
Red/Yellow/Green
Delimiter Separating sign between pairs of digits:
Auto If “Source” = “SPT”, “LTC(MTD)” or “MTD”:
The display decodes the separating sign out of the MTD
data.
Off No separating sign.
Decimal Points
Colon