3
4
1
2
Install the shower tray in the correct position and
tile in front of the seal strip.
Put a protective bead of silicone or other suitable
flexible sealant between the tray and the tile,
ensuring it does not come into contact with the
adhesive material on the flexi seal strip.
Attach to the edge of the shower tray so that it
is square and the edge protrudes at least 20mm
above the edge of the tray.
Make sure the adhesive strip is positioned so
that it will not come into contact with any silicone
sealer used later.
Note! If applying to a cut or trimmed tray,
ensure that the adhesive edge follows the top
edge of the tray and any material below the
base of the tray should be removed with a
sharp knife.
