PLS Access EA Series Скачать руководство пользователя страница 4

Страница: 4 / 67

General

1.3 Using the Manual Access™ EA & Access™ EAB

This manual aims to provide users and operators with all the information they require to ensure

that they are able both to use the lift appropriately and are able to manage it as autonomously

and safely as possible.

Before performing any operations on the lift, users and operators must carefully read the instruc-

tions given in this publication.

In the event of doubt over the correct interpretation of the instructions, contact the PLS technical

department to obtain the required clarifications.

This manual is an integral part of the lift, it must be kept safely by the purchaser and made avail-

able for use by the operators.

The contents of this manual comply with the Directive 2007/47/EC and were drafted following

the guidelines given in UNI 10893:2000. They also comply with the requirements of UNI EN ISO

10535:2007 and BS EN 1789:2007 and A2:2014

Data and drawings are indicative only; with a view to the continuous development and updating

of its products, the manufacturer may modify the contents without notice.

It is prohibited to disclose, edit or use this manual for any other purposes.

This symbol indicates IMPORTANT Information used by the Manufacture and

the User

This symbol indicates areas that need routine maintenance

This symbol indicates Operators areas of responsibility

This symbol indicates that a potentially hazardous situation could occur

This symbol indicates improper use of the lift

This symbol indicates IMPORTANT areas for the Safe operation of the Lift

Содержание Access EA Series




































































Результаты поиска

Содержание Access EA Series

Отзывы:

Похожие инструкции для Access EA Series

Бренды по названию

Популярные бренды

PLS Access EA Series, Инструкция по эксплуатации

Результаты поиска

Содержание Access EA Series

Отзывы:

Похожие инструкции для Access EA Series

Бренды по названию

Популярные бренды