Step 4:
Complete the Spinner Head assembly.
Thread the decorative Finial (K) onto the top of the spinner assembly.
Step 5:
Assemble the Stake Pole:
Slide the double Prong Stake (B) on top of the double Prong Stake (A).
Thread the Nut (C) onto the Ground Stake (B). Use the provided Wrench (Q) to tighten the nut.
Align Connector Bar (G) to the stake and use the three Bolts (F) and Washers (E) using the provided Wrench (Q) to tighten the bolts
until completely snug.
Insert the Connector Bar (I) into the bottom of the spinner head and twist tightly until snug. Use provided Wrench (Q) to tighten.
Thread Connector Bar (H) onto the bottom of Connector Bar (I).
Thread the assembled bottom Stake Pole (G) onto Connector Bar (H).
Step 6:
Install the Spinner in a choice location:
Push the four stakes into the ground, softening with water if needed to make it easier to drive the stakes in.
Use care not to over saturate the ground.
Step 7:
Hook up your garden hose:
Hook up your garden hose to the female adapter at the bottom of the pole.
Turn water on and enjoy.
Water will flow up the combined spinner poles and out through the Water Helixes (P).
In colder weather, remove hose from spinner to avoid damage from freeze/thaw conditions.
© 2017 Made in China exclusively for Plow & Hearth, Madison, VA 22727 plowandhearth.com 800-494-7544
