Plockmatic FeederPro 1000, Руководство оператора

Страница: 16 / 37

FeederPro Model 1000/1010 Operator Manual 15
T10160
3.10 Running a job using Model 1000 as a Collator, cont
If you are satisfied with your programmed settings, press the
green Start/Stop button to start the job.
This screen will be shown while the job is running.
After a successfully completed calibration, the screen
”CURRENT JOB” will be shown. From this screen you can
also choose to clear the counter by pressing the ”CLR”
button, to save the job by pressing the ”MEM” button or to
change settings made by pressing the ”ADJ” button.
Safe mode is that only one set is processed. Next set does
not start until the first set is finished. Unsafe mode is that the
machine will feed next set as soon as possible. It means that
more than one set can be processed at the same time.
Safe/Unsafe
mode
Note: In Unsafe mode the machine can never run faster than the
slowest machine connected.