PLKB ESCAPE V8 10, Руководство пользователя

Страница: 7 / 12

S T E P 2 . S E T T I N G U P Y O U R B A R A N D L I N E S
Attaching the top lines to the kite
Make sure you attach your flying lines using a larkshead knot. Place a larkshead
knot in the flying line connector, slide it over the middle knot on the top line
attachment on the bridle and tighten the larkshead as shown.
Attaching the rear lines to the kite
Connect the flying line connector to the rear line attachment and tighten the
larkshead as shown.
BRIDLE
BRIDLE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
BRIDLE
BRIDLE
BRIDLE
BRIDLE
1. Minimum bar pressure
2. Medium bar pressure
3. Maximum bar pressure
Undo the bridle line from the webbing loops on the kite and re-attach the line
to the correct webbing loop.
Bar pressure
1 2 3
To make the rear lines longer attach
the flying line attachment loop to the
bridle line just behind the adjustment
knot furthest away from the kite. To shorten the rear lines attach the
flying line attachment loop to the
bridle line just behind the adjustment
knot closest to the kite.