S T A R T I N G O F F
To start flying your kite you need to follow the following steps:
Step 1. Pumping up your kite
Step 2. Setting up your bar*, lines and preferred bar pressure setting
Step 3. Checking your safety systems*
*For more information on your controlbar please refer to the separate Navigator control bar manual
S T E P 1 . P U M P I N G U P Y O U R K I T E
Place your kite on the ground with its
leading edge into the wind, the
bottom of the kite facing upwards.
Attach the pump leash to the kite’s
pump leash attachment.
Attach the pump hose to the valve.
Make sure the clips on the air ducts
leading to the struts are all open.
Start pumping until the leading
edge feels firm. If you prefer to use a
pressure gauge, pump until it reaches
about 6 psi.
Detach the pump and close the inflate
valve.
will prevent the whole kite from los-
ing pressure in case of a puncture.
Place the kite on the ground with
the top of the kite facing up, leading
edge into the wind. Weigh down the
canopy with some sand or a board
with fins facing up.
Содержание ESCAPE V8 10
Страница 1: ...PLKB PLKB PLKB FOR LEADING EDGE INFLATABLE KITES U S E R M A N U A L ...
Страница 12: ...PLKB PLKB PLKB ...