Plinius SA-REFERENCE, Инструкция по эксплуатации

Страница: 7 / 22

5
PRECAUTIONS
PLEASE TAKE SPECIAL NOTE OF THE FOLLOWING PRECAUTIONS BEFORE
OPERATING YOUR NEW AMPLIFIER.
The PLINIUS SA-Reference Power Amplifier can be operated in mono mode delivering
up to 1000 watts into 8 ohms. This amplifier is also capable of a very large peak
current delivery.
The PLINIUS SA-Reference Power Amplifier operates in Class A. It is capable of
generating temperatures that could have an adverse effect on other equipment,
furniture etc.
DO NOT leave flammable material on the amplifier whilst running, as this
could pose a serious fire risk.
The PLINIUS SA-Reference Power Amplifier is of direct-coupled design, and offers no
protection from preamplifiers that have a high DC component at their outputs.
This amplifier operates at hazardous voltage levels. Any work requiring removal of the
lid or base of this amplifier must be referred to a suitably qualified and experienced
service technician.
DO NOT attempt to connect any input of this amplifier to it’s own outputs.
DO NOT earth any output terminal or connect any of these terminals together without
following the instructions in this manual or seeking qualified assistance.
DO NOT place this amplifier in any position where liquids or any foreign material may
accidentally enter it.
DO NOT connect any voltage source, short circuit, earth/ground or appliance (other
than suitable high fidelity loudspeakers) to the amplifier output terminals.
Some preamplifiers, processors, CD players’ etc. produce large switching pulses when
switched on causing a loud click through the loudspeakers. For this reason, turn on
all other equipment in your system before turning on your PLINIUS SA-Reference, or
ensure that the amplifier is in MUTE. You will not experience this phenomenon with
PLINIUS Preamplifiers.