When a user is created (section 5 of this manual) an ftp user account is created
with the same user name and password. The ftp user account can only be
accessed via ftp or via the admin / ftp folder on the network (If you intend to use
Plextor StorX as an internal NAS device only, you can delete these ftp user
accounts (deleting these ftp user account will not delete users as set up in section
5))
To access the ftp server:
There are two ways to access the ftp server. Internally and externally
Internally
1.
Enter your web browser and type in Plextor StorX IP address
You must put ftp:// in front (i.e. ftp://192.168.16.3)
2.
Enter the Username (user name of ftp account you want to open)
3.
Enter the Password (password of ftp account you want to open)
4.
Press Log On
External
NOTE: To allow external access to your Plextor StorX FTP, please consult
your Router, Hub/Switch user manual to set up access rights
5.
Enter your web browser and type in the external IP address as provided by
your router / hub manager software
You must put ftp:// in front (i.e. ftp://81.154.93.250)
6.
Enter the Username (user name of ftp account you want to open)
7.
Enter the Password (password of ftp account you want to open)
21 of 46
8.
Press Log On
