110
When you insert a blank Music CD-R or CD-RW disc, the following
happens:
PLEXTALK will say "Digital audio recordable disk. Push Record key". This
indicates that PLEXTALK has recognised that the CD is a recordable Music
CD and that it is ready to record in digital audio format.
Now push the Record key.
PLEXTALK will say "Record to disc. Level monitor auto". PLEXTALK will
then say "Auto" repeatedly.
•
This indicates that PLEXTALK has automatically gone into the
recording stand by state. It also indicates that the recording level
will be set using the automatic gain control (AGC).
•
At this point you are ready to record to the blank Music CD using
the built in microphone. If you do not want to record at this time,
press the Cancel key to exit from recording stand by.
16.4. Getting information about your CD or CF card.
Whatever type of media you intend to record on, you may wish to check
the status of the CD or CF card from time to time. You can get information
about the CD or CF card as follows:
•
With the CD or CF card inserted, ensure that PLEXTALK is switched
to the appropriate media.
•
Press the Menu key once to access the Main Menu.
•
Use the Number 4 or 6 key to go to the "Media Management"
option and select it by pressing the Enter key.
•
Use the Number 4 or 6 key to go to the "Media Information" option
and select it by pressing the Enter key.
•
PLEXTALK will announce the type of media, the used space in the
title or album, the free space on the CD or CF card and, in the case
of CDs, whether it has been finalised or not.
•
The information will be repeated continuously.
•
When you have noted the relevant information, press the Enter key
to exit the menu system.
Содержание PTR 2
Страница 1: ...Portable Recorder PTR 2 User s Guide...
Страница 235: ...236...