The following diagrams show where the SCSI cable and audio cable need to be
connected to your internal CD-R drive:
NOTE:
If you connect both a CD-ROM and a CD-R drive to your computer, you
will likely use the CD-ROM drive for applications requiring the soundboard.
If this is the case, you should connect an audio cable between your
soundboard and your CD-ROM drive, not your CD-R drive.
CHAPTER 8 ---- Hardware Installation
Soundboard without SCSI Interface
1
Audio Connector
2
Power Connector
3
SCSI Connector
Soundboard with SCSI Interface (not recommended for PlexWriter)
1
Audio Connector
2
Power Connector
3
SCSI Connector
5.75" x 8.25" PLEX WRITER MANUAL
Plextor Manual,
Carla Williams
1/2/98
PX-R412CS OPERATION MANUAL
33
