If you purchased your SCSI interface board several months or years before
you purchased your 12/20PleX drive, you may need to update your device
drivers. See the discussion about device drivers in Chapter 9 of this manual.
3) You own a soundboard that has a SCSI interface built into it (e.g., Sound
Blaster SCSI II).
You may need to use the SCSI cable and, most important, the audio cable
we have included with your 12/20PleX (see page 34 for a discussion on
audio cables). If you have an external drive, you will also need a special
bracket connector and an internal SCSI cable. These should have been
provided by the soundboard manufacturer. They allow the internal SCSI
connector on your soundboard to be linked or connected to your external
drive. If they were not provided by your soundboard manufacturer, you will
need to purchase them from a local computer supply store.
You may also need to update your device drivers. See the discussion about
device drivers in Chapter 9 of this manual.
Once you have assembled everything you need, you’re ready to install your drive.
But first, a few words of caution are in order.
CHAPTER 3 ---- What Else Do I Need?
8
12/20PLEX OPERATION MANUAL
