operating manual
BAIndustrie_UK
6
Cut injuries, loss of eyesight
Parts can be ejected from the housing by rotation.
It must be therefore be ensured that the product is only used
in the closed place of destination. It must also be ensured that
no magnetic or non-magnetic parts get into the motor during
transport and assembly.
The product must always be protected against heat, dirt and
moisture, otherwise the adhesive strength of the components
may be lost.
Always ensure proper handling.
The product must never be contaminated with foreign bodies
/ adhesives / paint during assembly.
Modifications to the product are forbidden
Always ensure that the motor is properly fastened.
Always ensure that the controller settings are correct.
The product must be sufficiently cooled.
Operation of the motor at idling speed without load is
prohibited.
Electric shock, burns, fire
caused by energised parts.
The product must always be protected against overheating,
dirt and moisture, otherwise the components will be
damaged. This can cause short circuits.
The product as well as the contacts must be inspected for
overheating, soiling, deformation, fire and moisture before
commissioning.
Modifications to the product are not permitted.
The maximum bending radius of the connecting cables must
not be undershot. 6 x outer diameter.
To prevent high-impedance connections, only gold contact
plugs from Multi-Contact, Plettenberg or Schnepp are
permitted.
Assembly and/or dismantling only when de-energised.
