operating manual
BAIndustrie_UK
23
5. Troubleshooting
It is absolutely necessary to install the receiver as far away as
possible from the motor, regulator, controller and/or its current-
carrying cables. The aerial must not be laid past the motor and its
current-carrying cables. If this is not possible for structural reasons,
then these elements must be shielded with sheet steel or foil.
6. Repetetive handling
The housing surfaces can be cleaned with compressed air and a
dry, lint-free cloth.
The motor must never be oiled. If this is not observed, then the
correct functioning of the motor cannot be guaranteed or irreparable
damage may occur.
7. Disposal
A motor with exceeded service life is electronic scrap. E-scrap
consists on the one hand of valuable materials which can be
recovered as secondary raw materials and, on the other hand, it
contains environmentally hazardous substances.
Information regarding optimum material recycling is available from
commercial waste disposal companies.
Care
