7
About the iPORT CL-GigE External Frame Grabber
Feature Set
*Case and junction temperature limits vary by IC device. For more information, see
**Approximate, excluding 12-pin GPIO connector.
CL-GigEB-IND
CL-GigEB-IND
Order code
900-6010
900-6009
Device Model Name
iPORT CL-GigE-PT01-CL0IP01-128x
Description
Enclosed, industrial use
OEM board set, industrial use
Camera Link mode
Base
Base
Channels
Single
Single
MiniCL connectors
1
1
External or PoE powered
Yes
Yes
PoCL
Yes
Yes
Operating temperature
•
External powered:
-40°C to 60°C
•
PoE powered with PoCL off:
-40°C to 55°C
•
PoE powered with PoCL on:
-40°C to 50°C
See note*
Storage temperature
-40°C to 85°C
Dimensions (L x W x H) (mm)**
38 x 83 x 51
48.2 x 52 x 37
Weight (grams)
161
47
GPIO
LVDS/RS-422/HVTTL/±24V/±30V differential
or TTL/LVCMOS single-ended inputs
2
2
TTL/LVCMOS single-ended inputs
2
2
TTL/LVCMOS single-ended outputs
3
3
MTBF at 40°C (hours)
1,014,151
1,014,151
Interface and transfer rate
GigE interface with 1 Gb/s transfer rate
Standards compliance
Compliant with Camera Link version 2.0 and GigE Vision version 2.0
Regulatory compliance
RoHS2; REACH
Tap support
1 and 2 tap (dependent on selected pixel format)
Pixel clock
20 MHz to 85 MHz
Frame buffer
128 MB (120 MB is used for the frame buffer, 8 MB is used for the CL-GigE
firmware)
Serial communication
1 UART on Camera Link interface allows serial control of cameras using a
computer application over the GigE connection