PlenOptika QuickSee Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 52

PlenOptika QuickSee Скачать руководство пользователя страница 48

46

P/N 2018 - 10 B Rev A 6 – Release

Safety Symbols

Symbol

Desciption

Direct Current (DC) Power Supply

Product contains a Lithium Ion battery.
Definition:

Do not dispose battery in standard trash containers. Proper

disposal of Device and its components is required. Consult your nearest
recycling center for proper disposal instructions.

Manufacturer address

Manufacturing date

Consult Instructions for Use / User Manual

Type BF Applied Part

Standby and ON / OFF functionalities
• If the device is OFF, a short press on this button will turn on the device.
• If the device is ON, a short press will put the device in Standby mode.
• If the device is in Standby mode, a short press will put the device in Standard mode.
• If the device is ON or in Standby mode, a long press (> 7 seconds) will force shutdown.

Serial number of the device

Packaging, storage and shipment. Indicates the correct upright position of the
package.

Packaging, storage and shipment. The package has to be protected from moisture.

Packaging, storage and shipment. The package has to be handled carefully to avoid
any damage.

Packaging, storage and shipment. Indicates the range of atmospheric pressure to
which the package can be safely exposed.

Packaging, storage and shipment. Indicates the range of humidity to which the
package can be safely exposed.

Packaging, storage and shipment. Indicates the range of temperature to which the
package can be safely exposed.

FCC marking. Indicates that the electronic device is certified and the electromag-
netic interference from the device is under the limits that are approved by Federal
Communications Commission.

«
...
46
47
48
49
50
...
»

Содержание QuickSee





















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды