Pleion X-RAY R 10 R, Техническое руководство

Страница: 4 / 48

4 Technical manual – Installation instructions and start-up X-RAY R - ver. 1.0 del 07/11/2018
Regulation-compliant, non-personal fall protection or safety netting or other catch equipment, in accordance with DIN
18338 Rooof Covering and Roof Sealing Work and DIN 18451 Scaffolding Work with Safety Net, must be installed
before starting work.
Safety harnesses must be secured above the user if possible. Only secure safety harnesses to building elements or
connection points with sufficient load – bearing capacity.
If no personal fall protection or fall arrest system or equipment has been installed for technical reasons, safety
harnesses must be worn.
When using lean-to ladders, there is a risk of dangerous falls if the ladder sinks, slips or falls over.
Do not use damaged ladders e.g. splintered stringers and rungs on wooden ladders, bent or kinked metal ladders. Do
not patch up splintered oor broken stringers, step and rungs of wooden ladders.
Contact with live overhead electrical cables and wiring can lead to fatal injury.
Only use safety herness equipment (harnesses or belts, ropes and straps, fall arresters, reope shorteners) that havev
been approved by authorised testing authorities.
Work in the vicinity of live, electrical cables and wiring, where contact is possible, can only be carried out if safety
distances and precautions are observed.
Make sure that lean-to ladders are propped securely. Apply the correct leaning angle (68° - 75°). Secure lean-to
ladders against slipping, falling over and sinking into the ground e.g. by using wider feet, adjusting the ladder feet to
the ground surface, securing/hook fixtures.
The manufacturer declines any responsibility for failure to abserve safety. Regulations and/or information contained in
this manual which may cause serious accidents/damage.
If no personal fall protection or fall arrest system is used there is a risk of falling from a great height which can lead to
serious or fatal injury if no safety harness or equipment in used.
Wear protective goggles when drilling or handling collectors.
Only lean ladders against secure supporting surfaces. Cordon off ladders in traffic areas.
Wear safety shoes when carrying out installation work.
Wear cut-proof safety gloves when carrying out installation work or handling collectors due to sharp edges.
Wear a safety helmet when carrying out installation work.
SAFETY WARNING