TV-EC
DT Istr. (TV-EC) 06/2011_Rev.4_05/18 12/22
INSTRUCTIONS FOR USE
1.
Connect the plug to the mains socket
2.
Set the ignition knob to the desired position. The
switch can be set to 4 different positions.
3.
Select the desired power: turning the ignition knob
clockwise to position "1", the heater will turn on at
1000W power. If maximum power 2000W is
desired, turn the switch to position "2".
4.
To unplug the appliance, turn the switch to position
"0".
USE OF THE ENVIRONMENT THERMOSTAT MODE
This model is also equipped with a device – the Environment Thermostat – which, once the desired ambient
temperature has been set, controls and keeps such temperature until a new value is set.
To use this mode:
Turn the ignition knob until the 2000W power position.
Wait for the environment to reach the desired temperature.
Slowly turn the thermostat knob clockwise until turning off the appliance, which is indicated through the
thermostat tripping.
In this way, the temperature will be automatically adjusted and kept constant along time by the thermostat,
which will automatically activate the appliance when the ambient temperature falls below the desired
temperature.
USE OF THE SUMMER VENTILATION MODE
Set the selector to the Summer Ventilation mode to turn the appliance into a practical fan that can also be
used during summer.
SAFETY MEASURES
To avoid damages and dangerous situations caused by overheating, the fan heater is equipped with a safety
device that stops its operation in case of overheating, for example, due to a total or partial obstruction of the
grills. In this case, disconnect the appliance from the mains socket, wait for around 30 minutes so that it cools
down, and remove the object that is obstructing the grills. At this point, it is possible to start the appliance
again, as described above. The appliance should operate correctly. Should the problem come up again, contact
the nearest support centre.
POSITION
MODE
0
Off
Summer ventilation
1
1000W power
2
2000W power
