Safety Instructions
Pleiger Elektronik
GmbH & Co. KG
Fon +49 2324 398 330
D-58456 Witten
● Im Hammertal 51
Fax +49 2324 398 389
www.pleiger-elektronik.de
General information
This manual contains instructions and drawings for correct handling and using the equipment. Please
observe all instructions of this manual carefully.
Please note that not respecting the information, using the equipment not according the regulations be-
low, wrong installation or incorrect handling could influence personal or plant safety seriously!
This manual is part of this operation resource. Keep the manual safe for later use. The manufacturer re-
serves the right to change performance data, specification data or the design layout without an advance
notice.
Transportation and storage instructions
The equipment must be inspected upon reception for damages that may have occurred
during transportation or handling. If damages are obviously, inform the carrier and the
manufacturer immediately. Dropped components must not be applied because invisible
damages may influence the reliability.
Installation and electrical connection
The equipment has to be installed by qualified personnel only, that is familiar with the
safety requirements and potential risk. Please note the special safety requirements be-
longing the point of installation, generally accepted rules of technology, the connection
instruction in this manual and the available imprint on the component.
Intervention into the component
If malfunctions occur or something is dubious please contact the manufacturer. Intervention into the com-
ponent could heavily affect the safety of person and plant and will lead to termination of liability and caveat
emptor.
Intended use
To use the equipment is approved only if the instructions of this manual are complied and the use is
appropriate to the type label and to an application it is intended to.
In the field the technical specifications and denoted limit values have to be generally maintained. This
applies particular with regard to voltage, temperature and other noted environmental conditions. The use
beyond the specified and approved edge conditions could put life at risk, damage the component or cause
secondary damages to the plant.
Not intended use
Every use of the component that is not equal to the use describ
ed in chapter „intended use“ is obtained
as not intended use. Damages that result from not intended use and / or result from unauthorised inter-
vention on the component, not according to this manual, or not using original spare parts the claim for
warranty and liability of the manufacturer expires.
Use in safety related vital functions
It is the responsibility of the user to perform a risk analysis of the whole installation and to define potential
safety related functions.
It is the responsibility of the user to take care of appropriate measures to achieve the safeness in safety
related vital functions.
Technical Support:
+49 2324 398 333
[email protected]
