Plebani Strolley 108, Инструкции по сборке и использованию

Страница: 22 / 68

COMPONENTS:
In addition to this instruction manual, you will find the following components for
assembling the stroller:
A - Stroller Body
1 Piece
B - Rear Wheels 2 Pieces
C - Front wheels 2 Pieces
D - Left Front-bar 1 Piece
E - Right Front-bar 1 Piece
F - Carrying Bag 1 Piece
G - Full Rain-cover 1 Piece
OPENING
Remove the product and all of its components from packaging, check that all plastic bags
are empty and do not contain small parts or components (such as screws, bolts, caps or
other small parts), keep them away from the reach of children or remove them.
To open the stroller (A) unlock the locking hook by pulling it (Fig. 1) lift the handle, open
the stroller by turning handle (Fig. 2) until it is fully open (Fig. 3). Make sure it is
completely and firmly open by pushing the handle forward slightly. Fit the rear wheels (B)
by inserting the pins into the corresponding holes (Fig. 4). Check that they are fully
inserted by pulling them slightly outward. Insert the front wheels (C) into chassis holes
(Fig. 5). Check that they are fully inserted by pulling them down slightly.
Insert right front-bar (E) into its holder; be careful to match the shape of the armrest
terminal to the shape of the support hole. The two pieces fit into one only position (Fig. 6).
Make sure that the pin of front-bar is completely out of the hole; otherwise, move the
fabric slightly and push it down until the pin is completely out. Then turn the armrest
slightly inwards. Repeat the same operations for the left front-bar (D). Turn the two
armrests to the center of the stroller, inserting them one into the other until the right arm
(E) buttons are completely out of the left armrest (D) (CLICK) (Fig. 7).
Rotate canopy pushing it forward; now your "STROLLEY ®" is ready for use (Fig. 8).
Make sure that it is wide open, secured and stable, that there are no broken, defective or
missing parts.
BELTS
WARNING: ALWAYS use safety belts and crotch strap, properly adjusted and fixed!
To release belts and let your baby sit, press the button at the center of the buckle (Fig. 9).
To close them, insert the belts belt hook into the slots of vertical belts (Fig. 10), and then
both in the center buckle (CLICK) (Fig. 11).