5
ASSEMBLY INSTRUCTIONS
2. Insert eight M6 x 10mm bolts (AA) though the
holes in the firebowl (D) and into the rivet nut
in the legs (H). Use a Phillips screwdriver to
loosely tighten the M6x10mm bolts (AA), but
do not fully tighten at this time.
3. Attach the leg support ring (I) to the legs
(H) by inserting four M6 x 10mm bolts (AA)
through the holes in the support ring and into
the rivet nuts in the legs. Tighten all bolts
including those from the previous step with a
Phillips screwdriver.
2
3
4. Finger tighten four threaded pegs (CC) to
the inside of the fire bowl (D) as illustrated
in figure 4.
4
AA
CC
AA
M6x10mm Bolt
Threaded Pegs
M6x10mm Bolt
x 4
x 4
x 8
Hardware Used
Hardware Used
Hardware Used
H
AA
I
CC
H
D
D
AA
