5
4. Insert 4 dowels (CC) into pre-drilled holes in
base (C) and 4 dowels (CC) into top edge of
inner panel assembly. Slip previous assembly
over all dowels (CC) until snug. Secure with
bolts (AA) and washers (BB) inserted through
pre-drilled holes as illustrated. Tighten with
screwdriver.
5. Insert 4 dowels (CC) into predrilled holes in
top edge of assembly. Slip top panel (A) over
dowels (CC) until snug. Secure from the inside
with bolts (AA) and washers (BB) through pre-
drilled holes as illustrated. Tighten with screw-
driver.
6. Attach cabinet door with glass insert (N) on
left side by sliding hinges into corresponding
hinge receivers on left side of assembled man-
tel. Tighten set screws with screwdriver. Attach
handle (FF) to cabinet door with glass insert
(N) with screw (GG) as illustrated.
Repeat on right side using second cabinet
door (N).
ASSEMBLY INSTRUCTIONS
5
A
C
AA
BB
CC
4
AA
BB
CC
6
N
N
FF
GG
