4
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2-3).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Lay base (C) upside down on a flat, smooth
surface. Attach legs (F) to base (C) by screwing
into predrilled holes in glue blocks on corners
of base (C).
2. Set base (C) upright. Insert 4 dowels (CC)
into predrilled holes in base (C) as illustrated.
Insert 2 dowels (CC) in predrilled holes in
each end of shelf rail (E). Slip left inner panel
(L) and right inner panel (M) over dowels in
base (C). Slip dowelled ends of shelf rail (E)
into predrilled holes in left inner panel (L) and
right inner panel (M) as illustrated. Secure by
inserting bolts (AA) and washers (BB) through
predrilled holes in bottom edge of inner panels
and tightening with screwdriver.
3. Insert 4 dowels (CC) in predrilled holes in
left side panel (J) as illustrated. Slip left edge
of top shelf (B) over dowels (CC) and slip left
edge of top rail (D) over dowels (CC) as illus-
trated. Attach with bolts (AA) and washers (BB)
inserted through predrilled holes. Tighten with
screwdriver.
Repeat on right side using right side panel (K).
ASSEMBLY INSTRUCTIONS
1
2
3
C
C
J
L
B
AA
BB
CC
D
K
AA
CC
E
M
BB
F
