PLDT Home Telpad HC7, Руководство пользователя

Страница: 112 / 112

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
The interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference
received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate this equipment.
When only use MID by portable meet FCC RF Exposure Information (FCC SAR)
The Device meets the government’s requirements for exposure to radio waves.
The device I designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communication Commission of the U.S. Government.
The exposure standard for wireless mobile devices employs a unit of measurement knows as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/Kg. Tests for SAR are
conducted using standard operating positions accepted by the FCC with the device transmitting
at its highest certificated power level in all tested frequency bands. Although the SAR is
determined at the highest certificated power level, the actual SAR level of the device while
operating can be well below the maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser required to reach the network. In
general, the closer you are to a wireless base station antenna, the lower the power output.
The highest SAR value for the device as reported to the FCC when tested for use when worn on
the body, as described in this user guide is 0.885W/Kg for Body and summation is 0.885W/Kg for
Body.
While there may be difference between the SAR values levels of various devices and at various
positions, they all meet the government requirement.
Talpad’s also meet FCC RF Radiation Exposure Statement when end user use together with MID.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.