Remove 2" x 4" x 24
¹⁄₂
" horizontal board (not shown) from this area so
no entrapment hazard is created when Climbing Bars are attached.
Attach Climbing Bars at dimensions shown.
Use the Climbing Bar as a drill guide and drill
¹⁄₈
" holes 1" deep in the
boards.
Attach with #14 x
¹⁄₄
" pan head screws.
ROOKIE - GOLD, SILVER, BRONZE
Remove existing Gym Rings and attachment hardware.
NO swinging elements, including Gym Rings, should be
attached to overhead Climbing Bars since they pose a
conflicting/fall hazard.
Items for this STEP:
(4) Climbing Bars
(16) #14 x
¹⁄₄
" pan head screws
IMPORTANT:
The Climbing Bars must be
positioned as specified, otherwise
a head entrapment could exist.
23
11
”
3
³⁄₄
”
11
”
11
”
Go to page 31 for anchoring instructions.
LT 6456 Climbing Bar Instructions_AS Instructions '04 R1 2/24/10 3:04 PM Page 23