2 X 4 X 36"
ROOF SUPPORT
4-1/2"
CARRIAGE BOLT
TORQUE
WASHER
3/8" WASHER
3/8" LOCK NUT
BOLT CAP
1: FIND THE FOUR 2 X 4 X 36" ROOF SUPPORTS. THE ROOF SUPPORTS WILL MOUNT ON THE OPPOSITE SIDE OF THE
COUNTER-SUNK HOLES IN THE CORNER POSTS.
2: FROM THE OUTSIDE OF THE ROOF SUPPORTS, USE A 4-1/2" CARRIAGE BOLT WITH A TORQUE WASHER. THE
CARRIAGE BOLT/TORQUE WASHER WILL GO THROUGH THE HOLE IN THE ROOF SUPPORT, INTO THE HOLE OF THE
CORNER POST. SET THE TORQUE WASHER WITH A HAMMER.
3: USE A 3/8" LOCK NUT WITH A 3/8" WASHER TO SECURE THE ROOF SUPPORTS. DO NOT FULLY TIGHTEN THE LOCK
NUTS AT THIS TIME.
4: CONTINUE MOUNTING THE ROOF SUPPORTS TO THE CORNER POSTS. WHEN ALL ROOF SUPPORTS ARE ON THE
CORNER POSTS, MOVE THE ANGLED ENDS OF THE ROOF SUPPORTS TOGETHER, MAKING SURE THAT THE POINTS OF
THE ANGLED ENDS ARE FLUSH TO EACH OTHER. TIGHTEN ALL LOCK NUTS AFTER ADJUSTING ROOF SUPPORTS.
5: USE GREEN BOLT CAPS TO COVER ANY EXPOSED THREADS.
STEP 49: ROOF SUPPORTS
68
Содержание Colossal Kingdom Deluxe
Страница 6: ...THIS PAGE INTENTIONALLY LEFT BLANK 6...
Страница 8: ...THIS PAGE INTENTIONALLY LEFT BLANK 8...