4
1
3
2
1
2
2
3
3
1
5
4
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Hole in the
front axle linkage
Attach the Steering Column
│
12
R/C type
Turn the vehicle body on its side. Remove the
M5x22 machine screw
and
Ø5
nut
from the
R/C driver
with a screwdriver.
1. Attach the
R/C driver
to the
steering gear box
, and make it match with
steering gear box.
2. Insert the
straight end of steering column
up through the
hole in the R/C
diver, the hole in the steering gear box
from the bottom side, and out
through the
hole in the dash
.
3. Line up the
holes in the R/C driver
and the
hole in the steering column
,
tighten a
M5x22 machine screw
and
Ø5 nut
back in the same location with a
screwdriver.
4. Insert the
bent end of steering column
through the
hole in the front axle
linkage
.
5. Fit a
Ø
10 washer
to the steering column.
6. Insert a
split pin
into the hole in the steering column, bend the ends of split pin
back using
a
long nose pliers
.
Steering Gear Box
