4
1
3
2
Hole in the
front axle linkage
Turn the vehicle body on its side.
1. Slide a
Ø
10 washer
onto the
steering column
from the straight end.
2. Insert the
straight end of steering column
up through the
hole
at the front of
vehicle body from bottom side, and out through the
hole in the dash
.
3. Insert the
bent end of steering column
through the
hole in the front axle
linkage
.
4. Fit a
Ø
10 washer
onto the steering column.
5. Insert a
split pin
into the hole in the steering column, bend the ends of split pin
back using
a
long nose pliers
.
Attach the Steering Column
│
11
Normal type
HINT: If your vehicle equipped with Remote Control Function, see the
next page please!
Steering Gear Box
