PlayActive 2015 Electric Scooter, Руководство пользователя

Страница: 6 / 9

Page6
power switch is in the charge position, if the power switch is in the on or off position the
charger will have a red and green light illuminating which means no charge is taking place.
Make sure you have the switch in the correct charge position. After 4-6 hours the green
light on the charger is illuminated indicating the unit is now charged.
3 Shifts Switch with Power-off protection
1. Turn on:
press “ON” shift (When press “ON” shift, the circuit of batteries, controller and
other parts are connected, then you can operate the scooter)
2. Power off:
press “OFF” shift (When press “OFF” shift, the circuit between batteries and
controller are completely disconnected, this will protect
the batteries’ lifetime and
performance.)
3. Charging:
press “CHA” shift (When press “CHA” shift, the circuit between battery and
charging system are connected, but disconnected from the controller system, the scooter
can only be charged in this status,
Circuit Breaker
When the current is too high, the fuse will pop up, you only need to press it down, the
scooter can work again, no need to change fuse
Riding
1.
Make sure that all of the exposed bolts and screws are tightened .
2. Raise the kickstand to its up position.
3. Push the on/off switch to the ON position
4. Put one foot on the deck of the ELECTRIC SCOOTER while pushing off with the other
foot, gently rotate the THROTTLE GRIP, on the right side of the handlebars. The
ELECTRIC SCOOTER will begin to move on its own power.
Your scooter has a variable speed hand throttle. You can control the speed of your scooter
by the amount of pressure you use when rotating the hand throttle. The more you rotate,
the faster you will go.
Please ensure this small grub screw is secure and tight using the small allen key provided.