PlayActive 2015 Electric Scooter, Руководство пользователя

Страница: 5 / 9

Page5
Assembly
1. Carefully remove your scooter from the box.
2. Install the front wheel.
3. To unfold the scooter, begin by pressing the grey plastic lever up on the FOLDING
HANDLE with one hand, while gently pulling up on the handlebars with the other.
The handlebar will snap into place and will not move when secured properly.
4. Loosen the handlebar clamp, and raise the handlebar to the desired height, being
sure the pole snaps into place. Then tighten clamp securely.
5. To attach the handlebars to each side of the t-bar, first loosen the top handlebar clamp
then slide each handlebar into the t-bar being sure they snap into place and are in the
correct orientation for riding. Finish by clamping down the clamp lever securely.
Charging
WARNING: Do not allow your scooter to go into deep discharge, as this will damage the
batteries.
1. Make sure unit is turned off.
2. Charging socket is located on side. (see picture below)
3. Locate your Battery Charger. Find the charger socket end that has a
single-prong socket and plug it into the scooter.
4. Next, plug the AC plug into a wall outlet.
When first plugged in, the charger will have one red light that will illuminate as long as the