26
Installation and user guide for PLATINUM® inverters 3800 TL, 3801 TL, 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Placing into operation
Initial operation menu
Country code
Select the country required using the
/
buttons and confirm
with
OK
.
further settings may be required depending on the country. These
settings depend on the network operator.
The country code is automatically applied to all network participants.
The country code can only be changed for a period of four hours after
initial operation and feed-in starts. This menu will not be displayed later.
Date
Enter the current date.
▪
Use the
/
buttons to set the digits.
▪
Use the
/
buttons to continue to the next digit.
▪
Choose
OK
to confirm the date entered.
Time
Enter the current time.
▪
Use the
/
buttons to set the digits.
▪
Use the
/
buttons to continue to the next digit.
▪
Choose
OK
to confirm the time entered.
The date and time are automatically applied to all network
participants.
The date and time must be confirmed with
OK
, otherwise initial
operation cannot be completed.
Once the date and time have been entered, the TIME SETTINGS screen appears; see
“SETTINGS menu” on page 33.
Depending on the requirements of the utility company, the following
additional settings need to be made in the service menu; see “Service
menu” on page 36:
▪
Phase balancer*
▪
Grid support
▪
Power reduction *
* These menus can only be changed 4 hours after initial configuration.
