16 Channel Digital Video Recorder User s Manual
27
record setting cannot change during recording process.
As long as the alarm input signal is effective, the alarm recoding continues, When the alarm input
signal loses efficacy, the time set up by A/M REC TIME
becomes effective, and when the time
goes out, the alarm recording automatically stops. In course of this, if you want to manually stop
alarm recording, the only way is to remove schedule (answer the password).
6.5 Time Recording
Time recording starts and stops recording automatically according to the pre-arranged time period.
It is applied to fixed timetable, for example, the periodical work time recoding (of off time recording)
with fixed start/stop time.
To start time recording function, besides making record schedule setup beforehand, must push
down the schedule button on the front panel to set schedule on. While pushing down this button,
the schedule symbol S
will display on the screen without pushing the schedule button, the time
recording parameter setup will not work.
The prerequisite condition of whether the time recording takes effective is system must be set on
schedule.
In time record state, you can push again schedule button the enter password to stop time
recording.
Because time recording is correlated closely with time, so before using this function should
previously adjust the time.
6.6 Playback
Push play button, system begins to play the images recorded
In the process of playing of fast backward playing, pushing push play button will begin normal
playing from the current place.
In the process of fast forward playing or fast backward playing, re-pushing play button can
resume play. Continuously
In the process of fast forward playing or fast backward playing, pushing push play button will
begin normal playing from the current place.
Continuous pushing forward button will change the fast-forward among five levels of speed (X2,
X4, X8, X16, X32) circularly. Circularly. Continuous pushing reward button will change the fast
backward among four levels of speed (X2, X4, X8, X16) circularly.
During playback mode, long press single frame rewind button will play backward frame by frame;
long press single frame forward button will play forward frame by frame. Push play button to play
normally.
Push again play button will stop playing.
6.7 Search play
Push search button, search play window will display on the screen.
TIME SEARCH: search play by input time.
