17
Moisten the RD2
elements with soapy
water.
Remove the plastic film
from the PN57 panel.
Make sure that the
proper side faces out.
Slide the panel
between the RD
glazing elements.
Note:
If your model
includes polycarbonate
panels with UV
protection, there is a
single plastic film
indicating the outside.
Acrylic panels are
protected by plastic film
on both sides.
Remove
the plastic before
installation.
Important:
In order
to maintain the life of
your greenhouse, it is
essential to insert
glazing elements fully
and completely, using
soapy water, as
explained on page 2.
Lock the both sides of
the last panel with
RC9 glazing elements.
Place one end in the
channel and push it
down along the length
of the profile. Make
sure that the end of
the RC glazing
element is in line with
the bottom of the RD
element.
Continue attaching
PN56 panels and RC9
glazing elements
according to the
number of LTMs you
have purchased.
Содержание Rion Sun Lounge
Страница 27: ...25 Notes...
