Plasson Rion Sun Lounge, Руководство по сборке

Страница: 24 / 28

22 Sun Lounge Assembly Instructions
Assemble the Door (Right Entrance Option)

Assemble the lower portion of the door.

Lock the connectors in place with pins.

Remove the plastic film from a PN1 panel.

Slide the PN1 panel into the lower portion of the
door in the side channels.

Assemble the upper portion of the door. Place the
DoorW1 door handle connector on the left side of
the door.
Note:
The larger handle always faces the outside.

Screw the Dow1 Lock Holder through the E2 profile
in the pin hole.

Lock the parts of the door in place with pins.

Remove the plastic film from a PN53 panel.

Slide the PN53 panel into the upper portion of the
door.

Attach the Door12 Slider to complete the door.

Lock the parts of the door in place with pins.

Take the roll of GF sealer and pull out enough for the
bottom of the PN1 panel and cut it to length.
Note:
Split the GF sealer before you cut it

Align it with the channel of the E2 profile.

Push it in to seal the PN1 panel with the GT1 pin &
glazing tool. Repeat for the top of the PN1 panel and
the bottom and top of the PN53 panel.

Take the roll of GF sealer, pull out enough for one
side of the PN1 panel, cut it to length, and align it
with the channel of the E1 profile.

Push it in to seal the PN1 panel with the GT1 pin &
glazing tool. Repeat for the other side of the PN1
panel and also for the upper PN53 panel.















