PlasmaMade Airfilter, Инструкция по установке и эксплуатации

Страница: 5 / 48

4
1. General
Thank you for the purchase of a
PlasmaMade Airfilter
.
The PlasmaMade Airfilter is intended to remove airborne dust particles, pollen, micro-
organisms (house dust mites, bacteria, viruses and moulds), cigarette smoke and smells
from the air. If the source of the smell is still present, the PlasmaMade Airfilter cannot
remove the smell completely (for example if you are still cooking). Harmful gases (carbon
monoxide etc.) cannot be removed by the PlasmaMade Airfilter .
The PlasmaMade Air Filter features OACS (Ozone Active Control System) and IACS
(Ionization Active Control System) to meet the latest, strictest safety standards.
For more information, please see: www.plasmamade.com.
Traditional air filtering PlasmaMade Airfilter
Extracts dirty air outside. This increases
energy consumption and costs.
Works on a recirculation basis. In this way,
no energy or heat is lost.
Air is only extracted, not cleaned.
Smells, pollen, allergens, grease and
other coarse pollutants are filtered out
of the air by means of plasmamade
recirculation.
Filters must be replaced and/or cleaned. Self-cleaning filter. No mechanical pre-
filter needed, the filter cleans itself.
Often devices that make a lot of noise.
Makes no noise and in fact has a noise-
reducing effect on the equipment on
which the filter is applied.
Consumes relatively much electricity.
Very low power consumption (12 watts)
due to DC technology and a 12 volt
connection.
The
PlasmaMade Airfilter
produces a very small amount of ozone. This amount lies
well below the permitted value. It may well cause a slight ionisation smell.