Connection
Plasma Screenland
04/07
7
En
Connection
Connections
Connection elements on the rear of the unit
RS-232C
VGA IN
DVI IN
DVD COMPONENT IN
SPECIAL SIGNAL IN
AC POWER IN
230 V ~ 50 Hz
Cr
Cb
Y
6
7
8
10
9
11
6
RS-232C
External control connection for D-Sub 9-pin serial inter-
face cable connecting the plasma display to a PC or a
tuner box
7
VGA IN
Connection socket, D-Sub 15-pin, for VGA connection,
e.g. for PC
8
DVI-I IN
Connection sockets 29-pin, Digital Visual Interface for
feeding digital picture signal, e.g. PC
Note:
The display can process the following signals:
Horizontal
sampling frequency max:
15.7 kHz
(TV)
69 kHz (PC)
Vertical
sampling frequency:
60 Hz (TV)
85
Hz
(PC).
Display resolution: see page 15.
9
DVD COMPONENT IN
Component input signal via RCA video cable (YCbCr)
10
SPECIAL SIGNAL IN
Socket for connecting to SCINEMA-BOX II with ac-
companying cable
*
11
AC POWER IN
Mains connection socket
220 – 240 V / 50–60 Hz
Note:
If the system is connected to the power voltage,
parts of the machine are in operation due to the
stand-by function. In order to switch off the system
completely, disconnect it from the mains.
Connecting to the SCINEMA BOX II
The plasma display is designed for operation with the SCI-
NEMA-BOX II.
Connect the plasma display (top of illustration) to the SCI-
NEMA-BOX II (bottom of illustration) using the 15-pin
VGA connecting cable supplied.
* Note:
Connect the Plasma monitor to the SCINEMA-
BOX II using only the VGA 15 PIN service cable
included with the SCINEMA-BOX II.
The VGA cable included with the Plasma monitor
is suitable only for PC applications!
