Copyright Planika Sp. z o.o.
www.planikafires.com
IG0222#03
03.10.2019
7
3.
INSTALLATION
3.1.
Box contents
1x complete Lighthouse fireplace
4x Tempered glass screens
1x bag of decorative stones
4x twin wheels
1x AAA battery
1x 2 metre flexible hose Ø9mm – installed
1x pressure regulator (37mbar) – installed
1x Euro Set
1x installation manual and user’s manual
3.2.
Unboxing and installation
The contents of the boxes need to be carefully unwrapped from the foam foil.
Remove the bags with decorative stones from the burner reservoir and place them away from it.
Carefully pull out the glass shield wrapped in cardboard placed on the inside of the device
Check the completeness of the elements with the contents list.
Make sure that the device nor its elements weren’t damaged during the transportation (if they were, notify
the supplier).
Place Lighthouse on a flat, paved surface outside of the building, preferably on the place of final installation.
Leave sufficient space on the side of the appliance where control panel is located (minimum 1 m).
The decorative stones are to be scattered evenly around the reservoir to completely cover the burner of the
fireplace.
WARNING!!!
The stones may not cover or be placed inside the device protecting the ignition unit (Photo 1).
Photo 1
