Copyright Planika Sp. z o.o.
www.planikafires.com
IG0222#03
03.10.2019
15
7.
Attach a new linkage on the stub of
regulator.
8.
Move the clamp into the stub again and
tighten it. WARNING! In the event of
visible damage on the clamp, replace it
for a new one.
Lighthouse is equipped with the anti-tilt valve which shuts the device down in case if the fireplace is
tilted or collapsed. The valve automatically cuts off the gas supply to the controller and this
extinguishes the flame.
WARNING!!!
make sure the anti-tilt valve is always installed in upward position.
