Copyright Planika Sp. z o.o.
www.planikafires.com
IG0222#03
03.10.2019
21
6.
MAINTENANCE AND UPKEEP
We recommend cleaning the ignitor, thermocouple and the main burner before the device is started again
after its been removed from storage during the winter period.
6.1.
Testing and cleaning
Please check and clean if necessary:
The main burner - if necessary, remove broken parts of stones and the existing dust.
Thermocouple (if necessary, remove the existing sediment). In the event of visible damage contact your
dealer.
Igniter - gap between igniter and the burner should not be bigger than 5 mm.
Glass shield – check for dirt smudges or possible scratches or cracks. If cracks are present replace the glass
screen for a new one. To conduct this contact your dealer.
Gas linkage and pressure regulator (in case their expiry date is invalid replace these ancillaries for new ones).
If you encountered problems with the regulator, gas linkage, burner or regulation valves do not try to fix these
parts. Contact a sales person, an authorised service or an importer in order to acquire spare parts. To ensure
the device is working efficiently use only original spare parts.
6.2.
Glass screens cleaning
Most of the existing types of smudges may be wiped with a dry cloth. In case of more substantial smudge you may use
liquids normally applied to ceramic tiles or windows. Always dry the glass screen to avoid damp patches which could
irreversibly embed into the glass.
WARNING!!!
Avoid leaving fingerprints on the glass. They will be embedded into the glass and you will not be able to
clean them.
