Planex BLW-HPMM-U, Руководство пользователя

Страница: 53 / 113

2
45
Chapter 2 Setup & Configuration
œ
Login ID
Ĉ
Enter the User Name provided by your ISP. (The ID must be
less than 32 alphanumeric characters and case sensitive.)
œ
Password
Ĉ
Enter the Password provided by your ISP. (The password
must be less than 32 alphanumeric characters and case sensitive.)
œ
Confirm
Ĉ
Please enter your password again for confirmation.
œ
Service Name
Ĉ
If your ISP provided the Service Name, please enter the
name according to the provided information. (The name must be less
than 32 alphanumeric characters and case sensitive.)
œ
AC Name
Ĉ
Enter the AC Name provided by your ISP.
œ
MTU
Ĉ
MTU means Maximum Transmission Unit , the largest
physical packet size, measured in bytes, that a network can transmit. The
default value is 1452. Please set up the MTU according to your system
environment. Only enter a new MTU when your ISP requires, otherwise,
please leave it as the default setting. When using PPPoE connection, you
may need to change MTU settings to maintain the connection with your
ISP, however, if the incorrect value was entered, you may be unable to
access certain websites. Reducing the packet size can help connecting to
certain websites or speeding up the transmission rate.
œ
LAN Type
Ĉ
You can choose the LAN type to be Unnumbered or NAPT.
œ
Unnumbered IP Address
Ĉ
Please enter the IP address provided by the
ISP. Enter the unnumbered IP address, only when you choose
unnumbered LAN type.