Planeta Premium Pro 0.75, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 34

7. Maintenance and Repair
All test results, maintenance and repair work which is undertaken on the hoist must be
documented in writing!
Maintenance and repair work must be carefully carried out, as this serves to maintain the
hoist and guarantee its safety.
All maintenance and repair work must be carried out by expert, trained personnel.
As far as possible, repair work must be carried out on unloaded hoists and not in
potentially explosive atmospheres.
7.1 Inspection Intervals
The table below gives an overview of test procedures required under normal operating
conditions and single-shift operation. Under more difficult circumstances or in a multi shift
operation, inspection intervals should be shortend accordingly.
when putting
into operation
daily
inspection
Inspection,
maintenance
every
3 months
Inspection every
12 months
Screw connections, housing and
hooks
X X
Housing wear
of surface coating
X X
Load chain Wear of surface
coating
X X
Load hook Wear of surface
coating
X X
Hand chain Wear of surface
coating
X X
Inspect hook for cracks and
deformation
X X
Check load chain for
elongation and wear
X X
Brake function
X X
Brake pads, ratchet, pawls
X
Existence of cellulose buffer
on trolley
X X
Wear on the wheels
X
Independently of the inspection intervals given here, the test regulations of the
respectively valid accident prevention laws must be observed!