Introduction
5
Rear Panel
Figure 2: Rear Panel
Power port (9V)
Connect the supplied power adapter here.
Switching Hub
(10/100BaseT)
Use standard LAN cables (RJ45 connectors) to connect this port to
your PCs. Both 10BaseT and 100BaseT connections can be used
simultaneously.
Use the "Uplink" port ONLY to connect to a normal port
on another hub.
WAN port
(10BaseT)
Connect the ADSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a standard LAN
cable.
Reset Button
When pressed and released, the Broadband Router will reboot
(restart).
This button can also be used to clear ALL data and restore ALL
settings to the factory default values.
To restore the factory default values:
•
Power Off
•
Hold the Reset Button down while you Power On.
•
Continue holding the Reset Button until the Status (Red) LED
blinks TWICE.
•
Release the Reset Button.
The factory default configuration has now been restored, and
the Broadband Router is ready for use.
DIP switches
Refer to the following table.
Printer Port
Standard parallel printer port. If you wish to share a printer, connect
it here.
