background image

difference between the virtual server and the DMZ function is that the virtual server 

re-directs a particular service/Internet application (e.g. FTP, websites) to a particular LAN 

client/server, whereas DMZ re-directs all packets (regardless of services) going to your 

WAN IP address to a particular LAN client/server. 

 

 

 

Parameter Description 

Enable 

Enable/disable DMZ 

Public IP Address 

The IP address of the WAN port or any other Public IP 

addresses given to you by your ISP 

IP Address of Virtual DMZ 

Input the IP address of a particular host in your LAN that 

will receive all the packets originally going to the WAN 

port/Public IP address above. 

Action 

Press <Add> to add DMZ rule. 

 

 

3.5 Firewall 

XRT-401E provides extensive firewall protection by restricting connection parameters, thus 

limiting the risk of hacker attack, and defending against a wide array of common Internet 

attacks. 

 

Parameter Description 

3.5.1 Firewall Options 

XRT-401E's firewall can block common hacker attacks and 

can log the attack activities. 

3.5.2 Client Filtering 

Client Filtering allows you to specify which hosts users can 

or cannot access to certain Internet applications by IP 

address. 

 

44

Содержание XRT-401E




























































Отзывы: