Planet XRT-401E, Руководство пользователя

Страница: 9 / 59

2) Then, you need to setup your LAN PC clients so that it can obtain an IP address
automatically. By default the XRT-401E’s DHCP server is enabled so that you can obtain
an IP address automatically.
"
Note
Please make sure that the XRT-401E’s DHCP server is the only DHCP
server available on your LAN. If there is another DHCP on your network,
then you’ll need to switch one of the DHCP servers off.
Step1
Î
Configure your PC to obtain an IP address automatically
This section will show you how to configure your PC’s so that it can obtain an IP address
automatically for either Windows 98/Me, 2000 or later operating systems. For other
operating systems (Macintosh, Sun, etc.), please follow the manufacturer’s instructions.
The following is a step-by-step illustration on how to configure your PC to obtain an IP
address automatically for 2a) Windows XP, 2b) Windows 2000, and 2c) Windows 98/Me
2a) Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection .
9