8
Chapter 2
Installation
This Chapter covers the physical installation of the Internet Broadband
Router.
Requirements
•
Ethernet Network employing 10BaseT and the TCP/IP protocol.
•
For Internet Access, a DSL or Cable modem, and an Internet Access account with a local
ISP (Internet Service Provider).
Procedure
Figure 3: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the Internet Broadband Router.
Ensure the Internet Broadband Router and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
Connect a 10BaseT cable from a Hub on your LAN to the LAN port on the Internet
Broadband Router.
3. Connect WAN Cable
Connect the DSL or Cable modem to the WAN port on the Internet Broadband Router. Use
the cable supplied with your DSL/Cable modem. If no cable was supplied, use a standard
cable.
2
Содержание XRT-101A
Страница 1: ...Networking Communication Internet Broadband Router XRT 101A User s Guide...
Страница 4: ...ii Internet Access 66 APPENDIX B SPECIFICATIONS 68 XRT 101A 68...
Страница 28: ...Internet Sharing Gateway User Guide 24 Figure 15 Windows NT4 0 DNS...
Страница 39: ...Operation and Status 35...