2.4GHz (N):
It forces the WNRT-620 to operate in 802.11n only. (maximum transfer
rate 108**Mbps)
2.4GHz (B+G):
It allows the WNRT-620 to operate in 802.11b and 802.11g
simultaneously. (maximum transfer rate 11Mbps for 802.11b clients, and maximum
54Mbps for 802.11g clients)
2.4GHz (B+G+N)
: It allows the WNRT-620 to operate in 802.11b, 802.11g, and
802.11n simultaneously. (maximum transfer rate 11Mbps for 802.11b clients,
maximum 54Mbps for 802.11g clients, and maximum 108**Mbps for 802.11n
clients)
ESSID
The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLANs.
Please make sure that the ESSID of all stations in the same WLAN network are the
same. The default value is “default”.
Channel Number
Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
MAC Address 1-4
If you want to bridge more than two wired Ethernet networks together with wireless
connection, you have to enter the MAC addresses of otherWNRT-620s that with
join the bridging work into the fields.
Set Security
IF you want to enable security to protect your wireless connection. Please press
“Set Security” button and refer to section “6.5 Security setting for bridge mode” to
configure the detail settings.
After configuration complete, please click “Apply”
button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
- 64 -
