Reset
Click “Reset” will clear your current selections.
After configuration complete, please click “Apply”
button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.6.2 Port
Forwarding
The Port Forwarding allows you to re-direct a particular range of service port numbers (from the
Internet/WAN Ports) to a particular LAN IP address. It helps you to host some servers behind the
firewall.
- 45 -
Parameters
Description
Enable Port Forwarding
Enable Port Forwarding.
Private IP
This is the private IP of the server in LAN.
Note:
You need to give your LAN PC clients a fixed/static IP address for Port
Forwarding to work properly.
Type
This is the protocol type to be forwarded. You can choose to forward “TCP”
or “UDP” packets only or select “both” to forward both “TCP” and “UDP”
packets.
Port Range
The range of ports to be forward to the private IP.
Comment
The description of this setting.
Add
Fill in the "Private IP", “Type”, “Port Range” and "Comment" of the setting to
be added and then click "Add". Then this Port Forwarding setting will be
added into the "Current Port Forwarding Table" below. If you find any typo
