User Manual of WNAP-6308
-94-
PPTP
L2TP
IPSec
Operating Mode
Bridge
Gateway
WISP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ
Firewall
Built-in firewall with Port / IP address / MAC / URL filtering
Wireless Mode
AP
Client
WDS PTP
WDS PTMP
WDS Repeater (AP+WDS)
Channel Width
20MHz / 40MHz
Wireless Isolation
Enables isolation of each connected wireless client from communicating with
each other mutually.
Encryption Type
64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup )
Wireless Security
Enable / Disable SSID Broadcast
Multiple SSID
Up to 2
Max. Wireless Client
20
Max. WDS AP
8
Max. Wired Client
30
WMM
Supports Wi-Fi Multimedia
QoS
Supports Quality of Service for bandwidth control
NTP
Network Time Management
Management
Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
Diagnostic Tool
System Log, Ping Watchdog
Mechanical & Power
IP Rate
IP55
Material
Outdoor UV Stabilized Enclosure
Dimensions (
Φ
x H)
45 x 169 mm
Weight
128kg
Installation
Pole mounting
Power Requirements
LAN
12~24V DC, Passive PoE
Pin 4,5 VDC+
Pin 7,8 VDC-
Power Consumption
1.5W
Environment & Certification