User Manual of WNAP-6308
-37-
Figure 5-27
Operation Mode – AP Bridge
In this mode, the wireless interface of the WNAP-6308 works as the WAN port.
To configure the Wireless Settings of AP Bridge Mode, please refer to the section
.
5.3.3.3.
Client Router (WISP)
In the Client Router mode, the WNAP-6308 has DHCP Server built inside that allows many LANs automatically
generate an IP address to share the same Internet. Connect an AP/WISP wirelessly and connect to LANs via
wired. The Client Router mode acts completely opposite to the AP Router mode.
Figure 5-28
Topology – Client Router (WISP) Mode
1. Connect the LAN port of WNAP-6308 to the POE port of the PoE Injector over an Ethernet cable.
2. Connect the PC to the LAN port of the PoE Injector over an Ethernet cable.
3. Plug one end of the power cord into the PoE Injector, and the other end in electrical socket.
4. Go to “
Advanced-> Operation Mode
” to configure it to
Client Router
mode.
Figure 5-29
Operation Mode – Client Router
